The type of vehicle usually found inside factories, warehouses and other work locations where moving heavy materials from one location to another is necessary is referred to as a forklift. The mast is the mechanism situated on the front of the forklift that hydraulically lowers and raises the load. The "cat" is the protected area where the driver of the forklift sits.
Forklifts could carry loads which weigh between one to five tons. Various kinds could be utilized to carry shipping containers and much heavier loads.
The tires of a forklift should be checked and maintained regularly. The types of tires on various forklifts differ according to factors like for example weight of the loads, ground surfaces and frequency of use. Every forklift operator must have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
You must frequently check the tires. Watch for indications of wear and damage to the tires. If the wear on the tire exceeds 40%, it must be replaced.
When purchasing tires, make sure that you are buying the correct type - polyurethane, solid or pneumatic.
When the tire needs replacing, position the forklift jack under the tire and lift the forklift high enough that you can change the tires easily.
In order to remove the damaged tire, pull the tire from the rim using the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you only have one jack, lower the forklift, then reposition the jack at the next tire.
A repair company can offer on-site tire repair. If the tire is extremely large for both mobile and in-house tire presses, the tire that is damaged will have to be transported to a shop which has a stationary tire press.